Stepping inside the spectacular new Ford Fiesta which is a result of quality craftsmanship is none other than entering a spacious cockpit

Ford India is known for rendering stylish cars to Indian market. After all, looks form the USP of cars many a times. Until and unless, a car is good looking, people would not even notice it, no matter how good its engine and interiors are

Suzuki Hayate has a CDI ignition type, 112.8 cc single cylinder, 4­stroke SOHC air­cooled engine with bore x stroke of 51 mm x 55.2 mm. It has a compression ratio of 9.5:1 having a wet multiplate type clutch and 4­speed constant mesh transmission with ground clearance of 175 mm. The dimension for the front tyre is 2.75 ­ 17 41P and for the rear one its 3.00 ­ 17 50P. The fuel tank capacity for the bike is 8 L. The dimensions for the bike are 2030 mm x 720 mm x 1070 mm. Suzuki Hayate has a good wheelbase of 1260 mm along with the kerb weight of 112 kg.The wheel base of Suzuki Hayate is 1260 mm with alloy wheels. The dimension of the front wheel of the bike is 2.75 ­ 17 41P and of the rear one is 3.00 ­ 17 50P.

Chevrolet Captiva is packed with 2.0L, 1991 cc diesel engine. The car's acceleration is majorly dependant on the power of the engine as well as on the transmission gearbox. The all new Chevrolet Captiva is available in diesel model only with both Automatic and Manual Transmission Gearbox.

Honda CBR600RR is one of the most successful racing machine in middleweight section across world. Initally, it wasn't featured with complete racing things but now it has all that is needed in a race winning bike. Comfort and performance are well taken care of in the Honda CBR600RR. The bike has won numerous race titles in world racing tracks including World Super Sport, AMA Super Sport etc.Honda CBR600RR comes with the same proven powertrain that has liquid cooled inline four cylinder, 16 valve, DOHC with a displacement of 599cc. The powerpacked mill of the Honda CBR600RR pumps out a wonderful power of 118 bhp at 13,500 rpm and belts out a stunning torque of 66 Nm at 11,250 rpm. It has been incorporated with 6 speed transmission

Operating Angles: The universal joint operating angles of the drive shaft must be within specification to prevent vibration and u-joint damage. Observe technical ... The most common drive shaft used on rear wheel drivevehicles.Construction: External tube with u-joint attached to each end. Tube can beconstructed of steel, aluminum, fiber compositesTorque Tube: Solid shaft without universal joints. Can be used when angle andlength between driving and driven components is constantSlip yoke: Attached to the end of the drive shaft. The slip yoke splines to thetransmission output shaft, and is free to slide in and out of the transmission. This isnecessary because as the rear suspension changes position, the length of the driveshaft must also change.Slip joint: Performs the same job as the slip yoke, but is not attached at thetransmission. The slip joint has internal splines on one side, and external splines onthe other side.Output shaft seal and bushing: The transmission output shaft housing contains aseal and a bushing. The seal is retained in the end of the housing and seals theoutside of the slip yoke. The bushing is retained in the output shaft housing, andsupports the slip yoke....

VIBRATION FROM THE DRIVELINE AT HIGHWAY. FORD: 2004-2006 F-1 50. This article supersedes TSB 04-25-8 to update the vehicle model years. ISSUE ...

yokes can cause a vibration in the driveline system. Remove the bearings from each end of the shaft, insuring that dirt and other foreign objects do not enter the ... The basic function of the propeller shaft is to transmit torquefrom the transmission to the axle. Most of the time torque isapplied in one direction (forward movement). The driveline issubjected to torque in the opposite direction during deceleration,reverse gear when using an exhaust brake, or retarder. Duringall this the driveshaft must operate through constantly changingU-joint working angles, as well as changing length while transmitting torque. All of these changes take place while the bus isin motion, going over rough spots in the road, changing direction,and adjusting to different loads. While the driveshaft is designedto operate under all of these conditions, it still requires propermaintenance and lubrication....

bearings, slip devices, crash optimisation, vibration damping and plunge capacity . One-piece front drive shaft. Source: GKN. This type of drive shaft is typically ... Significant amounts of aluminium are not only applied in the engine, but also in the rest of thepowertrain, i.e. in the transmission and the various driveline components. Most important aluminiumapplications are the various housings, but aluminium is also used for different functional components(e.g. hydraulic components of automatic transmissions, drive shafts, etc.).Aluminium is mainly chosen for its lightweighting effect. Further decisive factors are its excellent heatdissipation characteristics, the very good machinability of aluminium alloys as well as the feasibility toefficiently produce highly complex, thin-walled components. Most aluminium housings for applicationsin transmission and driveline are produced by high pressure die casting, but also other sophisticatedcasting techniques can be applied....

Stepping inside the spectacular new Ford Fiesta which is a result of quality craftsmanship is none other than entering a spacious cockpit