Glue spreader/cold or hot press laminating applications. • Hot continuous panel laminating applications. • May be ... (Evans #4260 Continuous Panel Laminator) ...Manufacturer and distributor of this product makes no warranties, express or implied. No warranty of merchantability or fitness for a particular purpose shall apply. The person using this product (the “user”) is solely responsible for determining whether this product is appropriate and/or suitable for user’s purpose and method of application. Limitation and exclusion of remedies and damages: the exclusive and sole remedy, and the manufacturer and distributor’s exclusive and sole obligation, for any defect of this product is the refund of the purchase price of the product. The manufacturer and distributor shall not, under any circumstances or under any legal theory, be liable to the purchaser or any other person for special, incidental or consequential damages of any nature, including without limitation damages to, or loss of use of, property, damages for loss of profits or revenues or any other damages arising from the purchase or use of the product. The manufacturer and distributor’s liability will in no event exceed the purchase price of the product.

The Photopolymer dry film laminators are simple and efficient units for .... speed specification from the dry film data sheet, select one of the four pre-set programs ...The laminator is now threaded with film and ready to run, it is advisable to check with the manufacturer the recommended laminating temperature of the dry film, the feed speed and the exit temperature required. As with some Dry Films the peelable POLYOFIN sheet can have a low melting temperature. The guide roller adjacent to the machine guard which is situated above the top heat roller can get hot. When the machine is switched off this POLYOFIN film can stick to the cooling guide roller. When next the machine is switched on and the drive motor activated this POLYOFIN film can break, if this happens then use the alternative treading diagram on page 5.

Technical Data Sheet. IMAGin. LF3697 issue 4 ... is recommended for the lamination of JT5925 P, JT5920 P and JT 5817 P perforated vinyls for window ...LF3697 will give satisfactory performance up to 5 years of outdoor exposure. The durability does not relate to the image protected but only to the laminating film. Indoor exposure will increase the durability values of the laminating film. Note : These end-use life estimates are based on accelerated ageing studies and outdoor exposure, under conditions experienced in vertical exposure and in "normal" temperate climates. Exposure to severe humidity and ultraviolet light, as in southern European countries, and also in tropical, sub-tropical or desert regions, will cause a more rapid deterioration. This also applies to polluted areas, high altitude and southfacing exposure.

MATERIAL SAFETY DATA SHEET....Thermal lamination BOPP films is not a flammable material but it will burn if exposed to flame, giving off harmful fumes which should not be inhaled. If films are involved in a fire they will ignite and continue to burn freely, provided sufficient oxygen is present and even if the source of the ignition is removed. NB : Ignition temperature of the film is 280°C Molten droplets of polymer can be produced which could ignite adjacent flammable and / or combustible materials. Skin or clothing contaminated by molten polymer should be drenched with clean water until cooled. In case of the former the patient should be referred for immediate medical attention and under no circumstances should any attempt be made to peel the solidified polymer off the skin.

coreactants functions as a laminating adhesive for flexible packaging and industrial applications. ... Refer to Material Safety Data Sheet for more information .ADCOTE 545-80 is a solvent based two component polyurethane adhesive with high solid characteristics, excellent heat and chemical resistance. This polyester adhesive in conjunction with various isocyanate terminated coreactants functions as a laminating adhesive for flexible packaging and industrial applications. ADCOTE 545-80 provides optical clarity and high bond strength. ADCOTE 545-80 adhesive adheres to a wide variety of substrates including cellophane, treated polyolefins, polyester, polyamide, aluminum foil, paper, metalized and PVDC coated materials, and the treated side of heatsealable coextruded films. Typical Uses ADCOTE 545-80 with Coreactant F is suitable for the lamination of transparent and aluminum-containing structures with and without sandwich printing.

Technical Data Sheet Backing Fleece 30ST/30. Backing Fleece ... fleece laminators with application of additional glue onto the veneer. Nonwoven Carrier ...The nonwoven carrier mainly consists of long-fibrous cellulose. Synthetic fibres as well as latex binder are admixed for increasing tearing resistance and flexibility. Glue Coating The glue coating is applied from a water-based system. In combination with a suitable lamination glue on the veneer it provides an excellent bond between fleece and veneer. Processing Backing Fleece 30ST/30 is processed in fleece laminators with application of lamination glue onto the veneer. Sufficient quantity and drying of the lamination glue is essential for a good bond between fleece and veneer. Please consider that all types of wood, machinery and lamination glue are different. Therefore it is absolutely necessary to carry out own tests.

The type of application equipment used to bond 3M™ Thermo-Bond Film 557 or 557 EG will depend on the application involved and on the type of equipment available to the user. Thin films and flexible substrates can be bonded using a heated roll laminator where heat and pressure can be varied to suit the application. Larger, thicker substrates can be bonded using a heated static press or, in some cases, an autoclave. For applications where a die-cut adhesive is to be transferred to a flat or three-dimensional part, a hot shoe or thermode method may be appropriate. It is recommended that whatever method of bonding the user chooses, the user should determine the optimum bonding conditions using the specific substrates involved.Note 1: The data reported in this data sheet were determined using 4.0 mil film ... roll laminator where heat and pressure can be varied to suit the application.

Product Data Sheet. Updated. : July 2000. Supersedes : April 1998. Product Description. Optically clear laminating adhesive for bonding smooth or textured ...

Product Data Sheet. GBC Arctic Titan 165¥Roll Laminator. GBC Arctic Titan 165¥ Roll Laminator The GBC Arctic Titan is the coolest member of the Titan range. It is designed to protect and enhance a wide variety of inkjet prints that are sensitive to heat and cannot be finished using thermal activated films. The Arctic Titan¥ is a cold only laminating machine and it can laminate and mount prints up to 1570mm wide using the range of GBC Arctic¥ Pressure Sensitive Adhesive films. ...

XI. Jan 2012. EPO-TEK. ®. 301-2. Technical Data Sheet ... Suggested for LCD optical lamination and sealing of glass plates. The product can resist yellowing ...Compliant adhesive that will be resistant to impact or vibrations. Low stress adhesive for bonding optics inside OEM / Scientific instruments. Fiber optic adhesive: bundling fibers, terminating fiber into ferrule, adhesive for mounting optics inside fiber components, bonding glass cover slip over V-groove; spectral transmission of visible and IR light. BIOCOMPATIBLE and NON-TOXIC; complies with USP Class VI biocompatibility standards for medical devices and implantation applications.