Duramax Fuel Filter Install Instructions Revised 3-16-09 Thank you for purchasing the Nicktane Duramax Fuel Filter Kit. Please read all the directions thoroughly before beginning ...

... Power Stroke 7.3L Power Stroke 6.0L Cummins 5.9L Duramax 6.6L Featuring: GT Wheel Design Dual Ball Bearing ... Adapter cable Installation instructions GM Duramax Ford Power Stroke Dodge ...

16 December 2008 Chevrolet/GMC Duramax BD X-Tuner # 1054745 1 BD Engine Brake Inc. Plant Address: Unit A10, 33733 King Rd, Abbotsford, BC, Canada V2S 7M9 U.S. Shipping Address: 88 ...

2001-2006 GMC/Chevy Duramax Auxiliary Fuel Filter Kit Low Fuel Pressure Alarm Light Kit.Introduction The purpose of this kit is to sufficiently filter diesel fuel entering the Duramax fuel system. The GM/Racor design of the factory fuel filter as been poor and the primary design concern was cost. This fuel filter kit will not only help filter your fuel properly but it will lengthen the fuel filter change interval.

This is a complete kit consisting of the filter head, mounting bracket, tall filter, lines, fittings, clamps, and fullcolor directions. The installation is straight forward and will work with either the stock (OEM) or TransferFlow replacement fuel tanks. The bracket is plasma-cut from one piece of 3/16” steel and features an integrated deflector plate to guard against road debris. Spare filters are reasonably priced and can be found at any CAT dealer or ordered with the kit. Please specify Long Bed or Short Bed when ordering. The Duramax Diesel Engine uses a high-pressure Bosch common-rail fuel injection system. This injection system is very sensitive to contaminants, which is why fuel filtration is so important in promoting long, healthy injector and fuel system life

GMC Duramax Diesel - 2500 And 3500 Models With the 8th digit of the VIN being the ... NOTE: Some vehicles may have a catalytic converter in front of the four bolt flange.

We routed the oil lines over the Chevy's various existing lines, protecting them with wire loom at all potential wear points. By-pass Installation - 2005 Chevy Silverado 2500HD ...

Main Bearing Set Thrust Washer Sets Cam Bearing Set Bushing, Piston Pin Valve, Intake Valve, Exhaust Valve, Exhaust Push Rod Piston Pump, Lube Engine Ring Set Engine Ring Set Engine Ring Set Engine Ring Set

This kit should only be installed on a vehicle that is in good working condition. Before you install the kit, thoroughly inspect the vehicle for corrosion or deformation of the sheet metal around the factory body mounts. If the vehicle is suspected to have been in a collision or misused, do not install this kit. Off-road use of your vehicle with this kit installed may increase the stress applied to the factory body mounts. We do not recommend that any vehicle with a body lift kit installed be involved in any extreme off-road maneuvers such as jumping. Failure to observe this warning may result in serious personal injury and/or severe damage to your vehicle.