gross load capacity when used as a weight carrying hitch: lbs. trailer weight & lbs. tongue weight. gross load capacity when used as straight line pull: lbs ... 1) Remove plastic shield between bumper and grill by removing the (4) mounting bolts. 2) Remove (2) Torx bolts (4 if vehicle is equipped with tow hooks) from the bumper, discard bolts and return tow hooks to customer. 3) Remove the front two bolts holding the sway bar to the frame and discard. 4) Position hitch on the front bumper and secure with hardware provided as shown. 5) Torque all 1/2" fasteners to 75 lb-ft and all 10mm fasteners to 35 lb-ft. 6) Reinstall plastic shield removed in step 1. Note: Shield may require trimming, consult customer before cutting. PERIODICALLY CHECK THIS RECEIVER HITCH TO INSURE THAT ALL FASTNERS ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND. Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage

2004 Jeep Wrangler. 28th Place. Brian Meyer & Meredith Ohlin. 2003 Jeep Wrangler. 29th Place ... 2009 Jeep Wrangler. Muddy Buddys. 31st Place. Mark & Andres Zahora & Kyle ...