Found 1 PDF associated with tag : Skid plate installation
1. Remove the driver side lower bumper bolt (bolt #1) also remove lower steering box mounting bolt (bolt #2) from frame as shown in figure #1. 2. Holding the skid plate in place, placing the three holes in the skid plate over the existing holes in frame. 3. With the skid plate in place, replace the bumper bolt (bolt #1) and steering box bolt (bolt #2). 4. Use the existing hole in the frame (A) to line up the rear skid plate bolt.Put the nut inside the frame. 5. Put the 5/8" aluminum spacer in place, shim accordingly with supplied washers and install the 3/8" x 2" bolt (bolt #3).
« previous    next »