Pre-Paint Fuselage Firewall_Fit engine and mount J2400

Jan 25th 2011, 21:38
Download:  2
View:  160 times
Bookmark
Rating:  

Recent Feedback

Be the first to comment

You must login to add comments

roooberto
1 subscriber

roooberto
Send Message

Description

In this task the engine mount will be fitted to the firewall at the top attach points only, the ... Engine mount sets: AN4-20A & -31A bolts plus washers, spacers, rubber mounts ... Objectives of this task:
In this task the engine mount will be fitted to the firewall at the top attach points only, the
engine will be attached to the engine mount, then the engine angle of incidence will be set and
finally the engine mount will be fitted to the bottom attach points on the firewall.
The engine angle of incidence is particularly important, both to the general flying qualities of
the aircraft as well as making the fitting of the cowls more straightforward, and should be set

Share

Tags

Engine mounts , Automotive

Meta Information

  • Author : Ross S Bond
  • Generator : AFPL Ghostscript 8.53
  • Created : Wed Aug 27 08:51:02 2008
  • Last Modified : 1369089029
  • Total Pages : 4

Share

Report