TABLE OF CONTENTS Programming Form.....3 Mechanics of Programming ... AAV should not be used when Paging or Alarm reports are being sent to a secondary number. See DATA FIELD DESCRIPTIONS section for details. REPORTS PER ARMED PERIOD...,2nd digit of OPEN REPORT is automatically sent as the user number if expanded or 4+2 reporting is selected. 2nd digit of EXIT ALARM REPORT is automatically sent as the 2nd digit of the zone alarm report code programmed in D56, if expanded or 4+2 reporting is selected. D66...

Your DSC security equipment has been designed to give the greatest possible flexibility and convenience. Read this manual carefully and have your installer instruct you on system operation and on which features have been implemented in your system. All users of this system should be equally instructed in its use. Fill out the System Information page and store this manual in a safe place for future reference. Fire Detection This equipment is capable of monitoring fire detection devices such as smoke detectors and providing a warning if a fire condition is detected. Good fire detection depends on having adequate number of detectors placed in appropriate locations. This equipment should be installed in accordance with applicable standards and codes. Carefully review the Family Escape Planning guidelines in this manual. NOTE: Your installer must enable the fire detection portion of this equipment before it becomes functional....

Regrettably, only shortlisted candidates will be contacted by 10th March 2013. Dubai +971 4 3559113 Abu Dhabi +971 2 6275592 jobscan.ae Branch Manager - Security ...

Bosch Security Systems F.01U.164.581 Issue 2 MIC-DCA – Deep Conduit Adaptor The MIC-DCA (deep conduit adaptor) provides a mounting position for a ...The MIC-SPR (wall mounting spreader plate) provides a secure mounting point for a MICSCA (shallow conduit adaptor), a MIC-WMB (wall mount bracket) and a MIC Series camera, The MIC-SPR spreads the weight of the MIC and supporting bracketry allowing installation on flat, masonry walls....Do not install the unit near any heat sources such as radiators, heaters, stoves or other equipment including amplifiers that produce heat. The MIC-SPR has four (4) centrally positioned rear access holes to permit bolts to fix a MIC-SCA to the MIC-SPR and 4 corner holes to fix the MIC-SPR to the mounting surface....

Your Honeywell security system is designed for use with devices manufactured or approved by Honeywell for use with your security system....Your Honeywell security system is designed for use with devices manufactured or approved by Honeywell for use with your security system. Your Honeywell security system is not designed for use with any device that may be attached to your security system's keypad or other communicating bus if Honeywell has not approved such device for use with your security system. Use of any such unauthorized device may cause damage or compromise the performance of your security system and affect the validity of your Honeywell limited warranty. When you purchase devices that have been manufactured or approved by Honeywell, you acquire the assurance that these devices have been thoroughly tested to ensure optimum performance when used with your Honeywell security system....